Plastic Fittings

• 
  CPVC Flange

  Flange also called flange disk. Flanges are parts connected between shafts for the connection between the pipe ends. It is also used for flanges at the inlet and outlet of equipment.

  Add to Inquiry
• 
  CPVC Union

  The union plays the role of flexible disassembly and assembly. The pipes and fittings on both sides has been installed. If a pipe or valve needs to be added in the pipeline, the union must be used to

  Add to Inquiry
• 
  PPH Coupling

  Connecting two lengths of PPH pipe is accomplished through the use of pph couplings, which come in a range of sizes and configurations. Depending on the end design of the pipes being connected,

  Add to Inquiry
• 
  PPH Female Adaptor

  PPH Female adaptor are fittings used to join two pieces of PPH pipe to continue a straight line.They can be used to connect pipes of differing ends. As standard products from sanking, its

  Add to Inquiry
• 
  PPH Reducing Socket

  When PPH coupling have different sized diameters , they are called reducing socket as well. Reducing socket in piping or chemical transfer system can reduce the power of the flow.

  Add to Inquiry
• 
  PPH Male Adaptor

  When you are installing PPH pipes, you may encounter some pipes with male ends, some pipes with female ends, and some pipes with plain end, and the female adaptor (SXT) will help you solve the

  Add to Inquiry
• 
  PPH Tee

  PPH Tee is one of the most common types of fittings used in the piping system. It has 3 way joint, which allow a line to be split into two lines at a 90 degree angle. We provide two different

  Add to Inquiry
• 
  PPH Reducing Tee

  The PPH reducing tee is often used in the production industry, because it is a pipe fitting mainly used for the connection between pipes. When a branch pipe is to be connected in the main pipe, and

  Add to Inquiry
• 
  PPH 45 Degree Elbow

  In PPH piping systems, PPH 45 degree elbow allow a change in flow direction. In general, the pipe must travel in a non-linear fashion from the source of the flow to its destination.

  Add to Inquiry
• 
  PPH 90 Degree Elbow

  For the elbows,there are two kinds of elbows in common, one is 90 degree elbow, the other is 45 degree elbow. PPH 90 degree elbow is the most commonly used type.

  Add to Inquiry
• 
  PPH Long Radius Elbow 90 Degree

  In piping systems, elbows are fittings that change the direction of the pipe. According to the angle, the most commonly used are 45° elbow and 90° elbow. The PPH long radius elbow is specifically

  Add to Inquiry
• 
  PPH Cap

  The PPH cap acts like a plug at the end of a pipe and seals the liquid through a waterproof seal. They offer the strength and durability of grade S5 and PPH materials.

  Add to Inquiry